LP Agentur



 Futaba

 JetLegend
 BVM Modeller
 BVM Tillbehör
 JetCat
 Simjet
 Graupner
 Pro-Mark
 flugmodellbau.de
 Tamjets


 Festo
 JetTronic
 Weatronic
 Loctite

 Bränsle & Olja
 Byggmaterial

 Tillbehör
 Snabblim
 JR
 Turbinservice
 Utblåsrör

 Meetings kalender


 Alla Produkter

Kundbilder
Bildgalleri
Byggbilder
Begagnat
Provflygning
Nyheter

Länkar





INFO & Kontakt
Betalningsvillkor

Afterburner Ring

Sounds like crazy but is a very powerful effect: The afterburner ring, designed to work with Multilight mini or Multilight Pro 3 gives you the optical effect of an afterburner at your jet model.

The second version (see first picture) is a real improvement ... guys this one really BURNS!
The third picture shows our CNC milling an afterburner ring.

Function: A basic current is applied plus an additional intermitting current showing the effect of a burning flame. Very impressive from some hundred yards of distance. The ring may be switched from the RC via separate switch or you may use it parallel to your gas-channel (V-Kabel). The switching point could be programmed at the electronic board.

Addendum: On April 22, 2007 I had the chance to see it in real flight (Thanks to Horst Lenerz on the Jet Rookie Meeting). All who saw it were really impressed (in fact: drooling)

Technical data:

Inner diameter 96mm, outer diameter 106mm
Powersupply: 2s Lipo or 6 Nixx
Power consumption approx. 1.2 Ampere
Sizes:

Afterburner for Standard Tailpipe (96mm inner, 106mm outer diameter, 5mm LED, 30° viewing angle)
Afterburner for Split Tailpipes (79mm inner, 89mm outer diameter, 5mm LED, 30° viewing angle)
Afterburner for Impeller-outlet (80mm inner, 86mm outer diameter, 3mm LED, 50° viewing angle)

Afterburner for the Lambert-Turbine (60mm inner, 66mm outer diameter, 3mm LED, 50° viewing angle)
Afterburner for the Twister from Multiplex (55mm inner, 61mm outer diameter, 3mm LED, 50° viewing angle)

Packing list:
Afterburner ring with additional electronic board, cabling ready

Pris: 1600:- (1 st på lager)

Scale lighting set for L-39
	Scale lighting set for L-39 "Albatros" in 1:5 or 1:4.6 scale size, like Airworld, Jetlegend, Gromotec. Content: Electronic board 2x landing light for tiptanks 2x cone shaped caps for landing lights 2x wingtip-assemblies 1x ACL for rudder 1x white tail-light prewired set. documentation Pris: 2800:-

Pneumatic Failsafe Module

Pneumatic Failsafe Module allows for model pilots to drive landing gear once before air pressure vanishes. Other purposes possible.

Adjustable pressure threshold and failsafe position of the outgoing servo. Reset only possible on ground by switching off power supply (security reasons)

Electronic sensor may be calibrated to air pressure
Input voltage allows usage of 4..6 NiCd or NiMh cells or 2 LiPo
Update interface for software
Optocoupler input for impuls from receiver
Size 30x30x25mm (incl. Sensor, without cabling). Weight with cables approx. 20g
Connector for pressure sensor is suitable for 2mm delivery pipes

Pris: 0:- (2 st på lager)

Module Beacon mini with Luxeon Emitter

Small and lightweight solution for much light at your model. Beacon mini is suitable for small models as well as for bigger ones. One can use LEDs, SMT-LEDs and Power LEDs up to 1W per channel.

This version (Luxeon Emitter) provides three Powerful 1W LEDs with high viewing angle (120°) and an intensity up to 44 Lumen (we only provide the best selection in Lumileds!

The user can choos from eight different flashing schemes.

Dimensions LED: Diameter 8mm x 5mm, Dome has a diameter of 6mm.
Dimensions Module: 20x16x4mm, 5g

Packing list:
Module with JR RC-Connector,
Three LEDs in the colors you choose (red, green, white)
6-pin Connector
Programming plug

Pris: 650:- (10 st på lager)

Beacon Evo 2
	Pris: 550:- (3 st på lager)

Multilight mini
	Pris: 1100:- (3 st på lager)

Strålkastare
	Pris: 300:- (5 st på lager)

nytt
	Pris: 0:-

Strålkastare
	Pris: 300:- (5 st på lager)

Positionljus
	Grön/Röd 25x10mm Pris: 500:- (5 st på lager)

Reserv glas
	diverse glas (olika storlekar) Pris: 20:- (20 st på lager)